DTC 11

DTC 11 OPEN CIRCUIT IN ABS SOLENOID RELAY CIRCUIT

CIRCUIT DESCRIPTION

DTC Detecting Condition:

This relay supplies power to each ABS solenoid. After the ignition switch is turned ON, if the initial check is OK, the relay goes on.

Wiring Diagram:

Step 1 - 2:

Step 3 - 4:

Step 5 - 6:

INSPECTION PROCEDURE

HINT: Start the inspection from step 1 in case of using LEXUS hand-held tester and start from step 2 in case of not using LEXUS hand-held tester