Blower Motor Relay: Service and Repair

BLOWER MOTOR CONTROL RELAY

REMOVAL

1. REMOVE THESE PARTS:
a. Front door scuff plate RH
b. Cowl side trim RH
c. No.2 under cover
d. Glove compartment door
e. Glove compartment panel




2. REMOVE AIR DUCT
Remove the 3 screws and duct.




3. DISCONNECT WIRE HARNESS

4. REMOVE BLOWER MOTOR CONTROL RELAY
Remove the screw and blower motor control relay, then disconnect the connectors.

INSTALLATION
Installation is in the reverse order of removal.