Electronic Brake Control Module: Service and Repair
REPLACEMENTHINT:
- COMPONENTS: See Brake Master Cylinder; Diagrams; Exploded Views.
1. REMOVE DOOR SCUFF PLATE ASSEMBLY LH [67920]
2. REMOVE FRONT DOOR OPENING TRIM COVER LH [62316B]
3. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY NO. 1 [55402D]
4. REMOVE SKID CONTROL ECU ASSEMBLY [89540]
(a) Disconnect the skid control ECU assembly and skid control buzzer assembly connectors.
(b) Remove the 2 bolts and skid control ECU assembly.
5. REMOVE SKID CONTROL BUZZER ASSEMBLY [86652A]
(a) Using pliers, remove the skid control buzzer assembly.
6. INSTALL SKID CONTROL BUZZER ASSEMBLY [86652A]
7. INSTALL SKID CONTROL ECU ASSEMBLY [89540]
(a) Install the skid control ECU assembly with the 2 bolts.
Torque: 5.0 Nm (51 kgf-cm, 44 inch lbs.)
(b) Connect the skid control ECU assembly and skid control buzzer assembly connectors.
8. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY NO.1 [55402D]
9. INSTALL FRONT DOOR OPENING TRIM COVER LH [2316B]
10. INSTALL DOOR SCUFF PLATE ASSEMBLY LH [67920]
11. PERFORM YAWRATE SENSOR ZERO POINT
12. PERFORM STEERING ANGLE SENSOR ZERO POINT CALIBRATION
13. CHECK VSC SENSOR SIGNAL