Canada - Body - Tonneau Cover Retractor Bracket

Bulletin
0528

Issue Date
2002-03-28

Market
Canada

Reference
BC-02-001

Model
SC430

Year Range
2002

Component
BC

Subject:
TONNEAU COVER RETRACTOR BRACKET







The Tonneau Cover Retractor Bracket is added to the Tonneau Cover Retractor Holder order to improve durability on the '02 model year SC430 vehicle. The Tonneau Cover Retractor Holder and Tonneau Cover Retractor Bracket are now available as separate service parts. If the Tonneau Cover Retractor Holder is damaged, please repair it according to the replacement procedure in this service bulletin.

APPLICABLE VEHICLES: 2002 model year SC430 vehicles produced before the starting VIN shown below.







PRODUCTION CHANGE INFORMATION:







PARTS INFORMATION:







REPAIR PROCEDURE:







1. Remove Tonneau Cover Assembly
a) Remove the 2 covers and 2 nuts (Figure 2).
b) Remove the tonneau cover assembly.







2. Remove Tonneau Cover Retractor Holder RH
a) Remove the 3 screws and tonneau cover retractor holder RH.

3. Remove Tonneau Cover Retractor Holder LH.

NOTE:
When removing the holder, hold the cover securely so that the holder does not rotate by the spring force.







4. Install Tonneau Cover Retractor Holder LH
a) Rewind the tonneau cover and put it in the tonneau cover case.
b) Fit the holder shaft with the tonneau cover hole and install the holder in the tonneau cover case.







c) Install the bracket to the tonneau cover retractor holder and tighten the 3 screws.






5. Install Tonneau Cover Retractor Holder RH
a) Insert the tip of the shaft into the tonneau cover.







b) Turn the holder twice as shown in Figure 7 and install the holder in the case.







HINT:
If the shaft is pulled off from the holder, fit the holder spring with the shaft slit and press them in.







c) Install the bracket to the tonneau cover retractor holder and tighten the 3 screws (Figure 9).







d) Check that the tonneau cover can be taken in and out smoothly.







6. Install Tonneau Cover Assembly
a) Hook the claw of the bracket on the luggage compartment trim cover inner lower and install the tonneau cover with the 2 nuts.
b) Install the 2 covers.







REPAIR TIME:


NOTE:
Issue of this Technical Service Bulletin is to ensure that proper repair information is available. IT DOES NOT CONSTITUTE AN AUTHORIZATION FOR REPAIR. Normal provisions of the formal warranty policy, as applicable, will apply.