Front

REPLACEMENT
1. REMOVE FRONT DOOR SCUFF PLATE RH
2. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSY NO. 1
3. REMOVE INSTRUMENT PANEL SUB-ASSY LOWER





4. REMOVE ACCELERATION SENSOR ASSY
a. Disconnect the acceleration sensor connector.
b. Remove the nut and acceleration sensor from the instrument panel reinforcement.
5. INSTALL ACCELERATION SENSOR ASSY
a. Install the acceleration sensor with the nut.
Torque: 7.8 Nm (80 kgf-cm, 69 inch lbs.)
b. Connect the acceleration sensor connector.