Canister Purge Solenoid: Testing and Inspection

INSPECTION


EMISSION CONTROL VALVE SET

a. Inspect VSV for EVAP.




1. Using an ohmmeter, check that there is continuity between the terminals.

Resistance: 27 - 33 Ohms at 20 °C (68 °F)

If there is no continuity, replace the VSV set.




2. Using an ohmmeter, check that there is no continuity between each terminal and the body.

If there is continuity, replace the VSV set.




3. Check that air flows with difficulty from ports E to F.




4. Apply battery voltage across the terminals.
5. Check that air flows from ports E to F.
If operation is not as specified, replace the VSV set.