Canada - Body - Moonroof Initialization

Bulletin
0499

Issue Date
2001-09-24

Market
Canada

Reference
BE-01-006

Model
ES300

Year Range
2002

Component
BE

Subject:
MOON ROOF INITIALIZATION

This bulletin outlines the initialization procedure for the moon roof on the 2002 model year ES300.
If the battery has been disconnected, the sliding roof ECU will not be able to detect and memorize the moon roof position, resulting in the following features being inoperative:
- One-touch tilt up and down.
- One-touch slide open and close with jam protection.

Please use the following initialization procedure whenever the battery has been disconnected.

APPLICABLE VEHICLES: 2002 model year ES300 vehicles.

INITIALIZATION PROCEDURE:






1. Push and hold down the "TILT UP" side of the switch until the moon roof tilts all the way up and then tilts down slightly (approx. 10 mm at the rear).
2. Check for proper operation of the "One-touch slide open/close with jam protection" and "One-touch tilt up/down" functions by pushing the switch briefly to the "SLIDE OPEN" and "TILT UP" position.

NOTE:
Issue of this Technical Service Bulletin is to ensure that proper repair information is available. IT DOES NOT CONSTITUTE AN AUTHORIZATION FOR REPAIR. Normal provisions of the formal warranty policy, as applicable, will apply.