Seat Belt Systems
Repairs and Inspections Required After A CollisionSteering Wheel Pad and Spiral Cable
HORN BUTTON ASSEMBLY (VEHICLES NOT INVOLVED IN COLLISION)
a. Do a diagnostic system check.*
b. Do a visual check which includes the following item with the horn button assembly (with airbag) installed in the vehicle. Check cuts, minute cracks or marked discoloration on the horn button assembly top surface and in the grooved portion.
HORN BUTTON ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED)
a. Do a diagnostic system check.*
b. Do a visual check which includes the following items with the horn button assembly (with airbag) removed from the vehicle.
- Check cuts, minute cracks or marked discoloration on the horn button assembly top surface and in the grooved portion.
- Check cuts and cracks in wire harness, and chipping in connectors.
- Check the deformation on the steering wheel.
HINT: There should be no interference between the horn button assembly and steering wheel, and the clearance should be uniform all the way around when the new horn button assembly is installed on the steering wheel.
CAUTION: For removal and installation of the horn button assembly, and be sure to follow the correct procedure.
HORN BUTTON ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED)
a. Do a diagnostic system check.*
b. Do a visual check which includes the following item with the horn button assembly (with airbag) removed from the vehicle.
Check the damage on the spiral cable connector and wire harness.
HINT: There should be no interference between the horn button assembly and steering wheel, and the clearance should be uniform all the way around when the new horn button assembly is installed on the steering wheel.
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
Front Passenger Airbag Assembly
INSTR PNL PASS L/DOOR AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
a. Do a diagnostic system check.*
b. Do a visual check which includes the following item with the instr pnl pass l/door airbag assembly installed in the vehicle.
Check cuts, minute cracks or marked discoloration on the instr pnl pass l/door airbag assembly and instrument panel.
INSTR PNL PASS L/DOOR AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED)
a. Do a diagnostic system check.*
b. Do a visual check which includes the following items with the instr pnl pass l/door airbag assembly removed from the vehicle.
- Check cuts, minute cracks or marked discoloration on the instr pnl pass l/door airbag assembly.
- Check cuts and cracks in wire harness, and for chipping in connectors.
- Check the deformation or cracks on the instrument panel and instrument panel reinforcement.
HINT: If the instrument panel or instrument panel reinforcement is deformed or cracked, never repair it. Always replace it with a new one.
CAUTION: For removal and installation of the instr pnl pass l/door airbag assembly, and be sure to follow the correct procedure.
INSTR PNL PASS L/DOOR AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED)
a. Do a diagnostic system check.*
b. Do a visual check which includes the following items with the instr pnl pass l/door airbag assembly removed from the vehicle.
- Check the deformation or cracks on the instrument panel and instrument panel reinforcement.
- Check the damage on the connector and wire harness.
HINT: If the instrument panel or instrument panel reinforcement is deformed or cracked, never repair it. Always replace it with a new one.
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
Side Airbag Assembly
FRONT SEAT AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
a. Do a diagnostic system check.*
b. Do a visual check which includes the following item with the front seat airbag assembly installed in the vehicle. Check cuts, minute cracks or marked discoloration on the front seat airbag assembly.
FRONT SEAT AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED)
a. Do a diagnostic system check.*
b. Do a visual check which includes the following items with the front seat airbag assembly removed from the vehicle.
- Check cuts, minute cracks or marked discoloration on the front seat airbag assembly.
- Check cuts and cracks in wire harness, and for chipping in connectors.
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
Curtain Shield Airbag Assembly
CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
a. Do a diagnostic system check.*
b. Do a visual check which includes the following item with the curtain shield airbag assembly installed in the vehicle. Check cuts, minute cracks or marked discoloration on the curtain shield airbag assembly.
CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED)
a. Do a diagnostic system check.*
b. Do a visual check which includes the following items with the curtain shield airbag assembly removed from the vehicle.
- Check cuts, minute cracks or marked discoloration on the curtain shield airbag assembly.
- Check cuts and cracks in wire harness, and for chipping in connectors.
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
Airbag Harness
COLLISION / NON-COLLISION INSPECTIONS
WIRE HARNESS AND CONNECTOR (VEHICLE NOT INVOLVED IN COLLISION)
Do a diagnostic system check.*
WIRE HARNESS AND CONNECTOR (VEHICLE INVOLVED IN COLLISION)
a. Do a diagnostic system check.*
b. Check breaks in all wires of the SRS wire harness, and exposed conductors.
c. Check to see if the SRS wire harness connectors are cracked or chipped.
HINT: The SRS wire harness is integrated with the instrument panel wire harness assembly. All the connectors in the system are a standard yellow color.
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
Airbag Sensor Assembly
AIRBAG SENSOR ASSEMBLY CENTER (VEHICLE NOT INVOLVED IN COLLISION)
a. Do a diagnostic system check.
AIRBAG SENSOR ASSEMBLY CENTER (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED)
a. Do a diagnostic system check.
AIRBAG SENSOR ASSEMBLY CENTER (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED)
a. Replace the airbag sensor assembly center.
Side Airbag Sensor Assembly
SIDE AIRBAG SENSOR ASSEMBLY (VEHICLES NOT INVOLVED IN COLLISION)
a. Do a diagnostic system check.*
SIDE AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED)
a. Do a diagnostic system check.*
SIDE AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED)
a. Replace the front seat airbag assembly and side airbag sensor assembly.
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
Front/Rear & Seat Position Airbag Sensor
AIRBAG FRONT SENSOR (VEHICLE NOT INVOLVED IN COLLISION)
a. Do a diagnostic system check.*
AIRBAG FRONT SENSOR (VEHICLE INVOLVED IN COLLISION)
a. Do a diagnostic system check.*
b. If the front tender of the car or its periphery is damaged, do a visual check for damage to the airbag front sensor, which includes the following items even if the airbag was not deployed:
- Cracks, dents or chips in the case
- Cracks, dents, chipping and scratches in the connector
- Peeling off of the label or damage to the serial number
AIRBAG SENSOR REAR (VEHICLE NOT INVOLVED IN COLLISION)
a. Do a diagnostic system check.*
AIRBAG SENSOR REAR (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED)
a. Do a diagnostic system check.*
AIRBAG SENSOR REAR (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED)
a. Replace the curtain shield airbag assembly and airbag sensor rear.
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
SEAT POSITION SENSOR (VEHICLES NOT INVOLVED IN COLLISION)
a. Do a diagnostic system check.*
SEAT POSITION SENSOR (VEHICLE INVOLVED IN COLLISION)
a. Do a diagnostic system check.*
b. Do a visual check for damage to the airbag front sensor, which includes the following items even if the airbag was not deployed:
- Cracks, dents or chips in the case
- Cracks, dents, chipping and scratches in the connector
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
Seat Belt Systems
SEAT BELT PRETENSIONER
1. PRETENSIONER IS NOT ACTIVATED
a. Perform a diagnostic system check.
b. Perform a visual check which includes the following items with the front seat outer belt removed from the vehicle.
- Check for cuts and cracks in, or marked discoloration of the center pillar lower garnish.
- Check for cuts and cracks in wire harness, and for chipping in connectors.
- Check for deformation of the center pillar.
CAUTION: For removal and installation of the front seat outer belt, Be sure to follow the correct procedure.
2. PRETENSIONER IS ACTIVATED
a. Perform a diagnostic system check.
b. Perform a visual check which includes the following items with the front seat outer belt removed from the vehicle.
- Check for deformation of the center pillar.
- Check for damage on the connector and wire harness.
SEAT BELT PRETENSIONER
REPLACE REQUIREMENTS
In the following cases, replace the seat belt pretensioner.
- If the seat belt pretensioner has been activated.
- If the seat belt pretensioner has been found to be faulty in troubleshooting.
- If the front seat outer belt has been found to be faulty during the check in items PRETENSIONER IS NOT ACTIVATED and PRETENSIONER IS ACTIVATED.
- If the front seat outer belt has been dropped.
CAUTION: For removal and installation of the seat belt pretensioner. Be sure to follow the correct procedure.