Front Door Belt Moulding Assy LH
REPLACEMENTHINT: In the RH side, work in the same procedure as in the LH side.
1. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSY
2. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH
3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH
4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSY LH
5. REMOVE FRONT DOOR SERVICE HOLE COVER LH
6. REMOVE OUTER REAR VIEW MIRROR ASSY LH
7. REMOVE FRONT DOOR BELT MOULDING ASSY LH
a. Remove the clip.
b. Put protective tape under the front door belt moulding assembly LH.
c. Using a moulding remover or scraper, remove the claws and front door belt moulding assembly LH.
HINT: Tape the scraper tip before use.