Pinout Values and Diagnostic Parameters

TERMINALS OF ECU

1. CHECK I/P J/B

Terminals Of ECU - Connector View:

Pinouts:

a. Disconnect the J/B connectors 2A, 2D, 2G, 2H, 2K.
b. Check the voltage and continuity of each terminal of the vehicle's side connectors.

2. CHECK MPX BODY ECU

Terminals Of ECU:

a. Disconnect the ECU connectors B5 and B6.
b. Check the voltage and continuity of each terminal of the vehicle's side connectors.

Pinouts:

1. Connect wire harness side connector to ECU connectors B5 and B6e.