System Inspection

1. INSPECT LUGGAGE DOOR OPENING SWITCH ASSEMBLY

Standard:

a. Inspect the luggage door opening switch assembly continuity.
If the operation is not as specified, replace the door lock assembly.




2. INSPECT FUEL FILLER OPENING LID LOCK SUB-ASSEMBLY
a. Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 1, and check that the motor operates in the open direction.
If the operation is not as specified, replace the motor.

b. Inspect the shaft strokes.

Standard: 10.3 mm (0.406 in.) or more