Interior Light Switch: Testing and Inspection

w/ Sliding Roof:
INSPECT FRONT PERSONAL LIGHT SWITCH CONTINUITY
If continuity is not as specified, replace the light assembly or bulb.







w/o Sliding Roof:
INSPECT FRONT PERSONAL LIGHT SWITCH CONTINUITY
If continuity is not as specified, replace the light assembly or bulb.

INSPECT FRONT PERSONAL LIGHT SWITCH CIRCUIT

INSPECT ROOM LIGHT CONTINUITY




a. Disconnect the connector from the room light.
b. Turn the room light switch ON, check that continuity exists between terminal 2 and body ground.




c. Turn the room light switch DOOR, check that continuity exists between terminals 1 and 2.
If continuity is not as specified, replace the light assembly or bulb.