Collision / Non-Collision Inspections

Vehicles not involved in collision:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM




a. Do a diagnostic system check.*
b. Do a visual check which includes the following item with the seatback assembly installed in the vehicle.
Check that there are no cuts or frayed in seams and out-side of seatback cover.

Vehicle involved in a collision and airbag is not deployed:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM

a. Do a diagnostic system check.*




b. Do a visual check which includes the following items with the seatback assembly removed from the vehicle.
- Check cuts and cracks of the side airbag assembly.
- Check cuts and cracks in wire harness, and chipping in connectors.

CAUTION: For removal and installation of the seatback assembly .Be sure to follow the correct procedure.

Vehicle involved in a collision and airbag is deployed:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM

a. Do a diagnostic system check.*
b. Do a visual check which includes the following items with the seatback assembly removed from the vehicle.
- Check the seatback installation part of the seat adjuster.
- Check the damage to the connector and wire harness.

HINT: If the seat adjuster is deformed, never repair it. Always replace it with new one.

*Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.

Displaying & Reading Trouble Codes
Component Tests and General Diagnostics