Camshaft Position Sensor: Testing and Inspection

ON-VEHICLE INSPECTION

NOTE: "Cold" and "Hot" in these sentences express the temperature of the coils and sensors themselves. "Cold" is from -10 °C (14 °F) to 50 °C (122 °F) and "Hot" is from 50 °C (122 °F) to 100 °C (212 °F).

INSPECT CAMSHAFT POSITION SENSOR




a. Disconnect the camshaft position sensor connector.

Resistance:

b. Using an ohmmeter, measure the resistance between terminals.

If the resistance is not as specified, replace the camshaft position sensor.




c. Reconnect the camshaft position sensor connector.