Fuel Pressure Release: Service and Repair

1. BEFORE WORKING ON FUEL SYSTEM, DISCONNECT NEGATIVE (-) TERMINAL CABLE FROM BATTERY

2. DO NOT SMOKE OR WORK NEAR AN OPEN FLAME WHEN WORKING ON THE FUEL SYSTEM

3. KEEP GASOLINE AWAY FROM RUBBER OR LEATHER PARTS

4. FUEL SYSTEM PRESSURE




When disconnecting the high fuel pressure line, a large amount of gasoline will spill out, so observe these procedures:
a. Disconnect the fuel pump connector.
b. Start the engine. After the engine has stopped on its own, turn the ignition switch OFF
c. Put a container under the connection.
d. Slowly loosen the connection.
e. Disconnect the connection.
f. Plug the connection with a rubber plug.
g. Reconnect the fuel pump connector.