ABS Warning Light Circuit

ABS Warning Light Circuit

CIRCUIT DESCRIPTION
If the ECU detects trouble, it lights the ABS warning light while at the same time prohibiting ABS control. At this time, the ECU records a DTC in memory.

After removing the short pin of the DLC1, connect terminals Tc and E1 of the DLC1 (or Tc and CG of the DLC3) to make the ABS warning light blink and output the DTC.

Wiring Diagram:

Steps 1 - 2:

Step 3:

Steps 4 - 7:

Step 8:

INSPECTION PROCEDURE






HINT: Troubleshoot in accordance with the chart for each trouble symptom.