Clearing Trouble Codes

NOTE: This is the only information provided by the manufacturer for clearing diagnostic trouble codes for this system.

1. Using SST, connect terminals Tc and E1 of the DLC1 or terminals Tc and CG of the DLC3, and remove the short pin from the DLC1.
SST 09843-18020 or 09843-18040

2. Turn the ignition switch ON.
3. Clear the DTC stored in the ECU by depressing the brake pedal 8 or more times within 5 seconds.
4. Check that the warning light shows the normal code.
5. Remove the SST from the DLC1 or the DLC3.
SST 09843-18020 or 09843-18040