ABS W/Traction Control (TRAC)

CIRCUIT DESCRIPTION

DTC Detecting Condition:

This relay supplies power to each ABS & TRAC solenoid. After the ignition switch is turned ON, if the initial check is OK, the relay goes on.

Fail safe function:
If a trouble has occurred in the ABS & TRAC solenoid relay circuit, the ECU cuts off the current to the ABS & TRAC solenoid relay and prohibits the ABS & TRAC controls.

Wiring Diagram:

Steps 1 - 2:

Steps 3 - 4:

INSPECTION PROCEDURE