Fuel Door: Service and Repair

REMOVAL

1. REMOVE FLOOR MAT
2. REMOVE DOOR STRIKER COVER
3. REMOVE TRIM REAR COVER
4. REMOVE TRIM FRONT COVER
5. REMOVE RH SIDE COVER




6. REMOVE FUEL FILLER LID SHIELD
a. Remove the nut and fuel lid opener solenoid.
b. Disconnect the connector from the solenoid.
c. Remove the 4 screws.
d. Remove the fuel tank cap and lid shield.

CAUTION: Always keep the tank cap closed when it is not required to be open. Keep all fire away during the operation.

e. Install the cap quickly.




7. REMOVE FUEL FILLER OPENING LID
Remove the 2 screws and lid.

HINT: At the time of installation, please refer to the following item.
When installing the fuel filler opening lid, adjust it.

INSTALLATION
Installation is in the reverse order of removal.