Seat Heater - Installation Method Changed: Overview

BODY
BO002-00
REVISED

April 28, 2000

Title:
SEAT HEATER REPLACEMENT
PROCEDURE

Models:
'95 - '00 LS 400

TSB Revision Notice:
The information updated in this TSB is underlined in the illustrations.

Introduction
The seat heater installation method for the LS 400 has been changed. When changing the seat heater, please follow the replacement procedure provided in this bulletin.

Applicable Vehicles
1995 through 2000 model year LS 400





Parts Information:
'95 -'97 MY





Parts Information:
'98 - '00 MY





Warranty Information

Applicable Warranty*:
This repair is covered under the LEXUS Basic Warranty. This warranty is in effect for 48 months or 50,000 miles, whichever occurs first, from the vehicle's In-service date.

Warranty application is limited to correction of a problem based upon a customer's specific complaint.

Required Tools and Material

^ Tacker

^ Tacks

^ Hog Ring Pliers





NOTE:
Special Service Tools can be ordered through the LEXUS SST program by calling 1-800-933-8335.

How to use the Tacker:





As shown, drive in a tack pin with the tacker and fix the seat heater to the seat cover.

Repair Information

^ For installation/removal of the seat and disassembly/assembly of the seat cushion assembly, refer to the 2000 model year LS 400 Repair Manual (pages BO-100 through 104).

^ Care should be taken during the operation to protect the seat cover from scratches, dirt or accidental cuts.