Service Specifications

Crankshaft Thrust Clearance
Standard 0.020-0.220 mm
Maximum 0.30 mm
Thrust Washer Thickness 2.440-2.490 mm

Crankshaft Circle Runout
Maximum 0.08 mm

Main Bearing Inside Diameter 66.986-67.000 mm

Main Bearing Oil Clearance
Standard
No.1 and No.5 0.017-0.033 mm
Others 0.029-0.045 mm
Maximum
No.1 and No.5 0.043 mm
Others 0.055 mm