Brake Pedal Freeplay

CHECK PEDAL FREEPLAY
a. Stop the engine and depress the brake pedal several times until there is no more vacuum left in the booster.
b. Push in the pedal by hand until the beginning of the second point of resistance is felt, then measure the distance, as shown.
Pedal freeplay: 1 - 6 mm (0.04 - 0.24 inch)
If the clearance incorrect, check the stop light switch clearance. If it is OK, then troubleshoot the brake system.

HINT: The freeplay to the 1st point of resistance is due to the play between the clevis and pin. It is 1 - 3 mm (0.04 - 0.12 inch) on the pedal.

c. Install the air duct, lower pad and under cover.