Without Scan Tool

Diag Memory Menu:

DIAGNOSIS MEMORY SCREEN
* On the diagnosis menu screen when pressing "DIAG. MEMORY" the screen turns to the screen shown in the illustration.
* Up to 6 diagnosis codes per an equipment are displayed. If more than 6 diagnosis codes are displayed, oldest diagnosis code will be deleted orderly.
* If the same diagnosis code occurred, the date when the code occurred is renewed.
* When the same diagnosis code occurs, the data when it occurred is renewed.
* When the diagnosis code does not occur to any equipment in the system, "O.K." is displayed.
* When "CLEAR" is kept to touch for 3 seconds, all diagnosis memories are cleared.
* When pressing "Memory All Clear" for 3 secs., diagnosis memories of all equipment are cleared.