Rear

REAR WHEEL HUB BOLT REPLACEMENT
1. REMOVE REAR WHEEL
2. REMOVE BRAKE CALIPER AND DISC
a. Remove the 2 bolts, brake caliper and disc.
b. Support the brake caliper securely.

Fig. 50 Removing Lug Bolt:

3. REMOVE HUB BOLT
Using SST, remove the hub bolt.
SST 09628-10011

Fig. 51 Installing Lug Bolt:

4. INSTALL HUB BOLT
Install a washer and nut to the hub bolt, as shown in the illustration, and install the hub bolt by tightening the nut.
5. INSTALL DISC AND BRAKE CALIPER
Install the disc and brake caliper with the 2 bolts.
Torque: 47 Nm (475 kgf-cm, 34 ft. lbs.)
6. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)