With LEXUS Hand-Held Tester

Check the speed sensor signal.




1. Hook up the LEXUS hand-held tester to the DLC2.
2. Start the engine.




3. Check that the ABS warning light blinks.

HINT: If the ABS warning light does not blink, inspect the ABS warning light circuit.

4. Drive vehicle straight forward.
Drive vehicle faster than 45 kph (28 mph) for several seconds.
5. Stop the vehicle.
6. Read the DTC by following the prompts on the tester screen.
Please refer to the LEXUS hand-held tester operator's manual for further details.




DTC of speed sensor check function