P/S Pump

SERVICE SPECIFICATIONS
Vane Pump Rotating:
Torque 0.25 Nm (2.2 inch lbs.) Or Less
Oil Clearance Between Pump Shaft And Bushing:
Standard 0.01-0.03 mm (0.0004-0.0012 inch)
Maximum 0.07 mm (0.0028 inch)
Vane Plate:
Height:
Minimum 8.0 mm (0.315 inch)
Thickness:
Minimum 1.77 mm (0.0697 inch)
Length:
Minimum 14.97 mm (0.5894 inch)
Clearance Between The Rotor Groove And Plate:
Maximum 0.03 mm (0.0012 inch)
Vane Plate Length:
Pump Rotor And Cam Ring Mark:
None 14.996-14.998 mm (0.59039-0.59047 inch)
1 14.994-14.996 mm (0.59032-0.59039 inch)
2 14.992-14.994 mm (0.59024-0.59032 inch)
3 14.990-14.992 mm (0.59016-0.59024 inch)
4 14.988-14.990 mm (0.59008-0.59016 inch)
Spring Free Length:
Minimum 36.9 mm (1.453 inch)

TORQUE SPECIFICATIONS
Front Housing To Rear Bracket 39 Nm (29 ft. lbs.)
Pressure Port Union To:
Front Housing 69 Nm (51 ft. lbs.)
Suction Port Union To:
Front Housing 13 Nm (108 inch lbs.)
Vane Pump Pulley Set Nut 43 Nm (32 ft. lbs.)
Pump Assembly:
Set Bolt 39 Nm (29 ft. lbs.)
Set Nut 43 Nm (32 ft. lbs.)
Pressure Feed Tube To:
Union Bolt 49 Nm (36 ft. lbs.)