Dash Board Disassembly and Reassembly

DISASSEMBLY




1. REMOVE WIRE HARNESS
a. Remove the 6 screws and clips.
b. Disconnect the connectors and remove the wire harness from the instrument panel.

2. REMOVE DEFROSTER NOZZLE
3. REMOVE NO.1 HEATER TO REGISTER DUCT
4. REMOVE NO.5 HEATER TO REGISTER DUCT
5. REMOVE AIR DUCT NO.1 RETAINER
6. REMOVE REGISTER NO.1
7. REMOVE GLOVE COMPARTMENT DOOR LOCK CONTROL CABLE
8. REMOVE INSTRUMENT PANEL GARNISH
9. REMOVE DEFROSTER NOZZLE GARNISH NO.1
10. REMOVE DEFROSTER NOZZLE GARNISH NO.2
11. REMOVE SOLAR SENSOR
12. REMOVE AUTOMATIC LIGHT CONTROL SENSOR

REASSEMBLY
Reassembly is in the reverse order of disassembly.