Initial Inspection and Diagnostic Overview

D13 SHOULDER BELT ADJUST SW LH [DRIVING POSITION MEMORY AND RETURN SW]
1-3: Closed with shoulder belt adjust SW LH at DOWN position
2-3: Closed with shoulder belt adjust SW LH at UP position

P6 POWER SHOULDER BELT ANCHOR RELAY
4-GROUND: Always approx. 12 Volts
7-GROUND: Always continuity
1-GROUND: Approx. 12 Volts with shoulder bolt anchor RH at up operation
3-GROUND: Approx. 12 Volts with shoulder belt anchor RH at down operation
5-GROUND: Continuity with adjust SW RH at UP position
8-GROUND: Continuity with adjust SW RH at DOWN position

S14 SHOULDER BELT ADJUST SW RH
2-6: Closed with shoulder belt adjust SW RH at DOWN position
1-7: Closed with shoulder belt adjust SW RH at UP position

S15 SHOULDER BELT ANCHOR SENSOR
2-6: Approx. 5 Volts with ignition SW ON
3-6: Change from approx. 5 Volts to 0 Volts with ignition SW ON

T8 (A), T9 (B) TILT AND TELESCOPIC ECU
(A) 4-GROUND: Always approx. 12 Volts
(B)15-GROUND: Approx. 12 Volts with ignition SW at ON or ST position
(B)22-GROUND: Always approx. 12 Volts
(A) 7-GROUND: Always continuity
(B) 9-GROUND: Always continuity