Heater Core: Service and Repair

REMOVAL

1. DRAIN ENGINE COOLANT FROM RADIATOR

HINT: It is not necessary to drain out all coolant

2. REMOVE THESE PARTS:
a. No. 1 safety pad
b. No. 1 under cover
c. No. 2 heater to register duct




3. REMOVE HEATER RADIATOR
a. Remove the screw and clamp.
b. Remove the 2 screws, 2 clamps and disconnect the heater radiator pipes.
c. Pull out the heater radiator.
d. Remove the 2 O-rings.

HINT: At the time of installation, please refer to the following item.
Do not reuse 2 O-rings.

INSTALLATION

Installation is in the reverse order of removal.