P0715

CIRCUIT DESCRIPTION
This sensor detects the rotation speed of the O/D input shaft from the rotation of the O/D direct clutch drum.
Its construction is the same as that of the No.2 vehicle speed sensor.
By comparing the O/D direct clutch speed signal and NO.2 vehicle speed sensor signal, the ECM detects the shift timing of the gears and appropriately controls the engine torque and hydraulic pressure in response to various conditions, thus doing smooth gear shift.
Reference waveform between terminals NCO+ and NCO- during engine idling.







DETECTING CONDITIONS




WIRING DIAGRAM

Step 1:

Step 2:

INSPECTION PROCEDURE
In case of the LEXUS hand-held tester, start the inspection from step 1 and in case of not using the LEXUS hand-held tester, start from step 2.