Removal

Front Passenger Airbag Assembly:

NOTE:
If the wiring connector of the SRS is disconnected and the ignition switch is in ON or ACC position, DTCs will be recorded.
Never use airbag parts from another vehicle. When replacing parts, replace with new parts.






1. DISCONNECT AIRBAG CONNECTOR
a. Using a screwdriver, remove the glove compartment door finish plate.

HINT: Tape the screwdriver tip before use.

2. REMOVE INSTRUMENT PANEL
3. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY






a. Remove the 2 bolts and 2 straps.






b. Remove the 2 nuts and front passenger airbag assembly.

CAUTION:
- Do not store the front passenger airbag assembly with the airbag deployment side facing down.
- Never disassemble the front passenger airbag assembly.