Power Window Motor: Adjustments

ADJUST POWER WINDOW GLASS

Resetting method of the motor for jam protection.
- When replacing the motor from the regulator or running the motor, make sure to reset the motor.
- This operation sets the limit switch OFF.
- Connect the motor connector to the vehicle side harness.
- Rotate the motor from 6 turns to 10 turns or for 4 - 5 secs moving it to the glass ascending direction.

HINT: Rotating the motor from 6 turns to 10 turns or for 4 - 5 secs. sets the limit switch to "OFF". (Top dead center of the door glass.)