Level Control Solenoid Valve: Service and Repair

REPLACEMENT
1. Remove front right wheel.
Torque: 103 Nm (76 ft. lbs.)
2. Rear:
Remove luggage compartment trim front cover.
3. Remove height control valve.

HINT: At the time of installation, check for air leakage.

a. Remove the connector.
b. Remove the air tube.
(1) Remove the holder.
(2) Spread the clip and pull the air tube out straight and slowly.

NOTICE: Do not get scratches or foreign particles on the O-ring, O-ring seal and flare section.

HINT: At the time of installation, please refer to the followinging items.
- If replacing O-ring, coat it with MP grease.
- Push the air tube in straight to correct it until the clip makes "click" sound.

(3) Remove the clip.
c. Remove the 2 nuts and the height control valve.
Torque: 5.4 Nm (48 inch lbs.)

4. Remove bushing, cushion and spacer.

INSTALLATION
Installation os in the reverse order of removal.