Disassembly and Reassembly

DISASSEMBLY

1. REMOVE PUMP SET PLATE FROM FUEL PUMP





(a) Remove the 2 nuts, 2 spring washers, and disconnect the 2 wires from the fuel pump.
(b) Remove the fuel pump set plate.
(c) Remove the screw, and disconnect the wire from the fuel pump earth clamp.
2. REMOVE FUEL PUMP FROM PUMP BRACKET





(a) Pull out the lower side of the fuel pump from the pump bracket.
(b) Disconnect the fuel hose from the fuel pump, and remove the fuel pump.
(c) Remove the rubber cushion from the fuel pump.
(d) Remove the screw and fuel pump earth clamp.





3. REMOVE FUEL PUMP FILTER FROM FUEL PUMP
Remove the clip and pull out the filter.

HINT: At the time of assembly, please refer to the following items. Use a new clip.

REASSEMBLY
Reassembly is in the reverse order of disassembly.