Component Tests and General Diagnostics

INSPECT AUTOMATIC LIGHT CONTROL AUTO ON:
a. Turn the ignition switch ON.
b. Turn the light control switch to AUTO.
c. Gradually cover the top of the sensor.
d. Verify that the lights should turn ON the accessory lights and the headlights.




INSPECT AUTOMATIC LIGHT CONTROL AUTO OFF:
a. Gradually expose the sensor.
b. Verify that the lights should turn OFF the headlights and the accessory lights.

INSPECT LIGHT-OFF CONDITION
a. Turn the-ignition switch ON.
b. Gradually cover the top of the sensor.
Lights auto ON:
c. Verify that the lights will go out when light control switch position OFF or the area surrounding the sensor gets bright or open the driver's door while the ignition switch is OFF.

INSPECT LIGHT-ON CONDITION
a. Open the driver's door while the ignition switch is OFF.
b. Turn the light control switch to AUTO leaving the door open and cover the top of the sensor, and verify that the lights go on when the ignition switch is turned ON.