On-Vehicle Inspection

ON-VEHICLE INSPECTION

INSPECT OIL CONTROL VALVE RESISTANCE
(a) Remove the V-bank cover.
(b) Remove the battery clamp cover, air cleaner inlet and in-take air connector.
(c) Disconnect the oil control valve connector.





(d) Using an Ohmmeter, measure the resistance between the terminals.

Resistance: 6.9-7.9 ohm at 20°C (68°F)

If the resistance is not as specified, replace the valve.
(e) Reconnect the oil control valve connection
(f) Reinstall the V-bank cover.