Resistance/Operation Inspection

ON-VEHICLE INSPECTION

1. REMOVE V-BANK COVER
2. REMOVE INTAKE AIR CONNECTOR PIPE
3. INSPECT INJECTOR RESISTANCE
(a) Disconnect the 8 injector connectors.





(b) Using an ohmmeter, measure the resistance between the terminals.

Resistance: 13.4 - 14.2 Ohms at 20° C (68° F)

If the resistance is not as specified, replace the injector.

(c) Reconnect the 8 injector connectors.
4. REINSTALL INTAKE AIR CONNECTOR PIPE
5. REINSTALL V-BANK COVER