Transmission Speed Sensor: Service and Repair

ON-VEHICLE REPAIR





1. DISCONNECT DIRECT CLUTCH SPEED SENSOR CONNECTOR
2. REMOVE DIRECT CLUTCH SPEED SENSOR
a. Remove the bolt and direct clutch speed sensor.





b. Remove the O-ring from direct clutch speed sensor.
3. INSTALL DIRECT CLUTCH SPEED SENSOR
a. Coat a new O-ring with ATF and install it to the direct clutch speed sensor.
b. Install the direct clutch speed sensor with the bolt.

Torque: 11 Nm (110 kgf-cm, 8 ft. lbs.)