Input Shaft: Application and ID

Input Shaft Snap Ring Thickness:
Mark 1 2.05-2.10 mm (0.0807-0.0827 inch)
Mark 2 2.10-2.15 mm (0.0827-0.0846 inch)
Mark 3 2.15-2.20 mm (0.0846-0.0866 inch)
Mark 4 2.20-2.25 mm (0.0866-0.0886 inch)
Mark 5 2.25-2.30 mm (0.0886-0.0906 inch)
Mark 11 2.30-2.35 mm (0.0906-0.0925 inch)
Mark 12 2.35-2.40 mm (0.0925-0.0945 inch)