Counter Gear: Application and ID

Counter Gear Snap Ring Thickness:
Front Bearing:
Mark A 2.05-2.10 mm (0.0807-0.0827 inch)
Mark B 2.10-2.15 mm (0.0827-0.0846 inch)
Mark C 2.15-2.20 mm (0.0846-0.0866 inch)
Mark D 2.20-2.25 mm (0.0866-0.0886 inch)
Mark E 2.25-2.30 mm (0.0886-0.0906 inch)
Mark F 2.30-2.35 mm (0.0906-0.0925 inch)
No.3 Clutch Hub:
Mark 2 2.06-2.11 mm (0.0811-0.0831 inch)
Mark 3 2.12-2.17 mm (0.0835-0.0854 inch)
Mark 4 2.18-2.23 mm (0.0858-0.0878 inch)
Mark 5 2.24-2.29 mm (0.0882-0.0902 inch)
Rear Bearing:
Mark 1 1.90-1.95 mm (0.0748-0.0768 inch)
Mark 2 1.96-2.01 mm (0.0772-0.0791 inch)
Mark 3 2.02-2.07 mm (0.0795-0.0815 inch)
Mark 4 2.08-2.13 mm (0.0819-0.0839 inch)
Mark 5 2.14-2.19 mm (0.0843-0.0862 inch)
Mark 6 2.20-2.25 mm (0.0866-0.0886 inch)
Mark 7 2.26-2.31 mm (0.0890-0.0909 inch)