Rear

REPLACEMENT
1. Remove rear wheel.
2. Remove rear brake caliper and the disc.

Fig. 50 Removing Lug Bolt:

3. Remove hub bolt. Using the Special Service Tool (SST) 09628 - 10011 or equivalent, remove the hub bolt.

Fig. 51 Installing Lug Bolt:

4. Install hub bolt. Install a washer and nut to the hub bolt, as shown in the illustration, and install the hub bolt by torquing the nut.
5. Install disc and the brake caliper.
6. Install rear wheel.
Torque: 103 N m (76 ft. lbs.).