Power Steering Pump

SERVICE SPECIFICATIONS
Pump Shaft To Bushing Oil Clearance
Standard 0.03-0.05 mm (0.0012-0.0020 inch)
Maximum 0.07 mm (0.0028 inch)
Spring Free Length (Minimum) 33.0 mm (1.299 inch)
Vane Plate To Rotor Groove Clearance
Maximum 0.04 mm (0.0016 inch)
Vane Plate:
Length (Minimum) 14.99 mm (0.5902 inch)
Vane Plate Height (Minimum) 8.6 mm (0.339 inch)
Vane Plate Thickness (Minimum) 1.40 mm (0.0551 inch)
Vane Plate Length:
Rotor And Cam Ring Mark:
None 14.999 - 15.001 mm (0.59051 - 0.59059 inch)
1 14.997 - 14.999 mm (0.59043 - 0.59051 inch)
2 14.995 - 14.997 mm (0.59035 - 0.59043 inch)
3 14.993 - 14.995 mm (0.59027 - 0.59035 inch)
4 14.991 - 14.993 mm (0.59020 - 0.59027 inch)
Vane Pump Rotating Torque (Maximum) 0.3 Nm (2.4 inch lbs.)

TIGHTENING SPECIFICATIONS
Front Housing To Rear Housing 24 Nm (17 ft. lbs.)
Installation Bolt:
28 mm Bolt 39 Nm (29 ft. lbs.)
45 mm Bolt 58 Nm (43 ft. lbs.)
Oil Reservoir To Front Housing:
Front Side Bolt 13 Nm (9 ft. lbs.)
Rear Side Bolt 24 Nm (17 ft. lbs.)
Pressure Port Union To Front Housing 83 Nm (61 ft. lbs.)
Pressure Tube To Union Bolt 49 Nm (36 ft. lbs.)
Vane Pump Pulley Set Nut 43 Nm (32 ft. lbs.)