Service Specifications

1st Gear Inner Race Flange Thickness:
Minimum 4.78 mm (0.1881 inch)
1st Gear Inner Race Outer Diameter:
Minimum 42.975 mm (1.6919 inch)
Counter Gear Bearing Journal Diameter:
Minimum 29.950 mm (1.1791 inch)
Counter 5th Gear Journal Diameter:
Minimum 26.975 mm (1.0620 inch)
1st, 2nd And 3rd Gear Thrust Clearance:
Standard 0.10-0.25 mm (0.0039-0.0098 inch)
Maximum 0.30 mm (0.0118 inch)
3rd Gear Radial Clearance:
Standard 0.015-0.066 mm (0.0016-0.0026 inch)
Maximum 0.200 mm (0.0076 inch)
Reverse Idler Gear Radial Clearance:
Standard 0.041-0.074 mm (0.0016-0.0029 inch)
Maximum 0.194 mm (0.0076 inch)
Reverse Idler Gear To Shift Arm Shoe Clearance:
Standard 0.20-0.41 mm (0.0080-0.0161 inch)
Maximum 0.90 mm (0.0354 inch)