Connecting Rod

DIMENSIONS
Connecting Rod Thrust Clearance:
Standard 0.250-0.402 mm (0.0098-0.0158 inch)
Maximum 0.500 mm (0.01970 inch)
Connecting Bolt Diameter:
Standard 8.100-8.300 mm (0.319-0.327 inch)
Minimum 8.000 mm (0.315 inch)
Connecting Rod Big End Inside Diameter:
Reference Mark:
Mark 1 55.025-55.031 mm (2.1633-2.1666 inch)
Mark 2 55.031-55.037 mm (2.1666-2.1668 inch)
Mark 3 55.037-55.043 mm (2.1668-2.1670 inch)
Bushing Inside Diameter 22.005-22.014 mm (0.8663-0.8667 inch)
Piston Pin Diameter 21.997-22.006 mm (0.8660-0.8664 inch)
Piston Pin Oil Clearance:
Standard 0.005-0.011 mm (O.0002-0.0004 inch)
Maximum 0.050 mm (0.0020 inch)
Rod Out Of Alignment Per 100 mm (3.9400 inch):
Maximum 0.050 mm (0.0020 inch)
Rod Twist Per 100 mm (3.9400 inch):
Maximum 0.150 mm (0.0059 inch)