Drive/Propeller Shaft

SERVICE SPECIFICATIONS
Shaft Runout:
Maximum 0.8 mm (0.031 inch)

TORQUE SPECIFICATIONS
Propeller Shaft:
To Differential 79 Nm (58 ft. lbs.)
Rear Shaft To Intermediate Shaft 74 Nm (54 ft. lbs.)
Center Bearing Set Bolt 49 Nm (36 ft. lbs.)
Intermediate Shaft Flange:
Torque (new nut) 181 Nm (134 ft. lbs.)
Loosen the nut.
Re-torque 69 Nm (51 ft. lbs.)