Fluid Pump, A/T

SERVICE SPECIFICATIONS
Body Clearance:
Standard 0.07-0.15 mm (0.0028-0.0059 inch)
Limit 0.3 mm (0.012 inch)
Tip Clearance:
Standard 0.11-0.14 mm (0.0043-0.0055 inch)
Limit 0.3 mm (0.012 inch)
Side Clearance:
Standard 0.02-0.05 mm (0.0008-0.0020 inch)
Limit 0.1 mm (0.004 inch)
Pump Body Bushing Inside Diameter:
Limit 38.19 mm (1.5035 inch)
Stator Shaft Bushing Inside Diameter:
Front Side (Limit) 21.58 mm (0.8496 inch)
Rear Side (Limit) 27.08 mm (1.0661 inch)

TORQUE SPECIFICATIONS
Stater Shaft To Oil Pump Body 10 N.m (84 inch lbs.)
Oil Pump To Trans Case 10 N.m (84 inch lbs.)