Service Hints

C 7 CRUISE CONTROL ACTUATOR
5-4: Approx. 38.5 Ohms

C15 CRUISE CONTROL SW (COMB. SW)
15-6: Continuity with main SW ON
5-6: Approx. 420 Ohms with cancel SW ON
Approx. 70 Ohms with Resume/Accel SW ON
Approx. 200 Ohms with set/coast SW ON

C20 CRUISE CONTROL ECU
14-Ground: Approx. 12 Volts with Ignition SW at ON position
15-Ground: Always Approx. 12 Volts
20-Ground: 4 Pulse with 1 Rotation of rotor shaft
18-Ground: Approx. 420 Ohms with cancel SW ON in control SW
Approx. 200 Ohms with set/coast SW ON in control SW
Approx. 70 Ohms with resume/Accel SW ON in control SW
13-Ground: Always Continuity