Speed Sensor, Front

Front Speed Sensor Components:

REMOVAL
1. Disconnect Speed Sensor connector.
(a) Remove the opening moulding.
(b) Remove the fender liner.
(c) Disconnect the Speed Sensor connector.
2. Remove Speed Sensor.

3 Clamp Bolts Holding The Sensor Harness To The Body And Upper Arm.:

(a) Remove the 3 clamp bolts holding the sensor harness to the body and upper arm.
Torque: 5.4 Nm (55 kg.cm. 48 inch lbs.)
(b) Remove the Speed Sensor from the Steering Knuckle.
Torque: 7.8 Nm (80 kg.cm, 69 inch lbs.)

INSTALLATION
Installation is in the reverse order of removal.
After installation, check Speed Sensor signal.