Clearing Trouble Codes

1. Using SST, connect terminals Tc and E1 of DLC2 or DLC1.
2. Ignition Switch ON.
3. Clear the DTC stored in ECU by depressing the Brake Pedal 8 or more times within 5 seconds.

NOTE: In this case, Anti-Lock Brake System (ABS) DTC are cleared.

4. Check that the TRAC OFF Indicator Light shows the normal code.
5. Remove the SST from the terminals of DLC2 or DLC1 .

NOTE: Disconnecting the battery cable during repairs will not erase the DTC in the ECU.