Heated Element: Testing and Inspection

INSPECT MIRROR DEFOGGER OPERATION




w/o Driving Position Memory:
(a) Connect the positive (+) lead from the battery to terminal 4 and the negative (-) lead to terminal 5.
(b) Check that the mirror becomes warm.

HINT: It will take a short time for the mirror to become warm.




w/ Driving Position Memory:
(a) Connect the positive (+) lead from the battery to terminal 6 and the negative (-) lead to terminal 7.
(b) Check that the mirror becomes warm.

HINT: It will take a short time for the mirror to become warm.

If mirror does not become warm, replace the mirror assembly.